工作定位器的特點
- 採用組合式結構，便於拆卸、包裝和運輸。
- 適用於各種電線、光纖、光纜。
- 捲筒安裝好後，通過壓桿可輕鬆將千斤頂提升到一定高度，以滿足不同工況要求
- 支架兩側安裝了兩個移動輪，解決您的運輸問題。
- 適用卷徑範圍廣：Φ1500mm-Φ3500mm(59´-137.8´)；適用卷寬：100mm-1200mm(3.9´-47.2´)。
| i-Lift號 | 2515001 | 2515002 |
| 模型 | TYX-4 | TYX-4A |
| 容量公斤（磅） | 4000(8800) | 8000(17600) |
| 可調間距 h2 mm(in.) | 140(5.5) | |
| 最大限度。位置高度 H1 mm(in.) | 1640(64.6) | 1800(70.9) |
| 分鐘位置高度 h1 mm(in.) | 540(21.3) | 680(26.8) |
| 軸尺寸 lxd mm(in.) | 1650XΦ76(65XΦ3) | |
| 輪徑 D mm(in.) | Φ150(5.9) | |
| 整體尺寸 WxH mm(in.) | 860 X 1867(33.9x73.5) | 1260X 1867(49.6x73.5) |
| 淨重 kg(lb.) | 228(501.6) | 278(611.6) |
Scope of application
◆Supporting the wire disc with using the matching fork when placing the wire in the wild.
◆The modular structure makes it easy to disassemble packaging and transportation.
防範措施
◆Apply to using on the ground in the wild;
◆The speed of the take-up rack should be less than 2Km/h and cannot be steered;
◆The load of wire reel should be reasonably distributed according to the load capacity of the take-up rack and the forklift attachment, and overload or partial load isn’t allowed;
◆Each runner bearing and shaft part should be inspected regularly every 3 months, add lubricating oil (fat), check and lock each pin and moving parts;
◆Lock the T-screw to prohibit shifting with the fork;
◆When releasing and receiving the line, it should be braked with manual timely, and forced to push under the non-braking state;
◆Special note: This machine is non-insulating antistatic material to avoid electrical safety accidents;
◆It is banned to using this machine when the temperature is more than 120℃and the environment with strong acid, phenol, chlorine, sodium hypochlorite, barium chloride, etc.
